Name: Customize Frameless Swing Shower Door - H06-02
Brand: Merlord
SKU: MD-H06-02
Price: 1000.00 USD
Availability: OutOfStock

Question 1

How do I measure for a frameless sliding shower door?

Accepted Answer

Measure width at three heights — top, middle, and bottom — and use the smallest reading as your door width so the panel clears. Measure height on the left and right separately, since they usually differ. Then hold a level flat against each side wall and record how far it leans over the full height. Those readings let a manufacturer cut a door that fits exactly.

Question 2

Is low-iron glass worth it for a frameless shower door?

Accepted Answer

For frameless doors, usually yes. Standard clear glass contains iron oxide that casts a green tint, and that tint grows more visible as glass gets thicker. At the 3/8" and 1/2" specs frameless doors use, low-iron looks noticeably clearer. Merlord offers Ultra-Clear Low-Iron as a glass upgrade option, so you can choose it when the clarity is worth it to you.

Question 3

What thickness of glass is best for a frameless shower door?

Accepted Answer

3/8-inch (10mm) tempered glass is the residential standard and the right choice for most frameless doors — rigid enough to resist flexing and made for standard hardware. Step up to 1/2-inch (12mm) only for very tall or wide panels that would otherwise bow. Merlord builds its frameless doors in certified tempered glass sized to your opening.

Question 4

How do you prevent hard water spots on a glass shower door?

Accepted Answer

Water spots are minerals left behind when water dries on the glass. A hydrophobic coating makes water bead and sheet off, so less is left to dry, and a quick squeegee after each shower removes the rest. Merlord includes a factory-applied Nano molecular shield coating on its frameless doors as standard, which outlasts spray-on sealants you reapply at home.

Question 5

Is a tempered glass shower door safe?

Accepted Answer

Yes. Certified tempered safety glass is heat-treated to be far stronger than ordinary glass, and if it ever breaks it crumbles into small, dull-edged pebbles instead of sharp shards. Always verify the tempering certification, not just the thickness. Merlord uses certified tempered safety glass across its frameless shower doors and backs the glass with a limited lifetime warranty against manufacturing defects.

Question 6

Can you install a frameless shower door yourself?

Accepted Answer

You can if you are handy and have installation experience, but it is not a beginner project. A single tempered glass panel weighs about 60-70 lb, so it takes two people to lift and set it, plus a drill, level, stud finder, and silicone gun. A system with adjustable wall jambs helps absorb walls that are slightly out of plumb. Merlord doors include an illustrated manual and a video, and professional installation is available if you would rather not do it yourself.

Question 7

Are soft-close shower door dampers worth it, and can they be replaced?

Accepted Answer

Yes on both. Soft-close dampers stop the glass from slamming, which protects the panel and hardware and extends their life. The feature that matters most is replaceability — cheap dampers are sealed in, so the whole unit fails when they wear. Merlord uses replaceable soft-close dampers, covered for one year under its warranty, so a worn damper is a quick swap, not a new door.

Question 8

What happens if my glass shower door is damaged in shipping?

Accepted Answer

Frameless shower doors ship crated on a pallet to protect the tempered glass. Inspect the crate and photograph any damage before you sign for delivery, because documented transit damage is what triggers a free replacement. Merlord offers free nationwide shipping and replaces glass damaged in transit when it's reported with delivery photos, so don't waive the inspection.